8888 display (always 8888 display)
Broken Components ：EEPROM Data
Check/Counter Measure/Solution:
1. Keep pressing “FUNC、UP、DOWN、STR、STOP” keys and power on.
2. If this EEPROM initialization is executed, key will be valid. But after this EEPROM initialization was executed, Japanese version, 0.4kW, 200V data is memorized on EEPROM and logic board set up is necessary.
3. Logic board set up
Set C91 "01"
Set C94 "FAB0"
Set C95 00 - 06; INV kW code
01; 0.2kW , 02; 0.4kW , 03; 0.75kW , , 04 ; 1.5kW 05 ; 2.2kW 06 ; 3.7kW
Try FACTORY SETTING (Initialization)
SJ100 kW setup procedure
Meaning
set C91 "01" ; Debug on
set C94 "D000" ; kW address
set C95 "xx" ; kW code
set B84 "01" ; to execute FACTORY SETTING
Try FACTORY SETTING
Check H03's display; to check kW data
|
